The Digital Soil Analysis Device provides an superior analysis compared to laboratory measurements since it eliminates the user errors. It decreases the analysis process from 15 days to 10 minutes with its fast analysis feature. Also, with its unlimited analysis opputunity, precision agriculture can be applied by analyzing the soil before each fertilization throughout the season. Thus, the input cost is reduced and high crop yield is obtained with the fertilization made according to the soil analysis results.
The Digital Soil Analysis Device instantly measures the soil properties, pH, organic matter, Nitrogen (N), Phosphorus (P₂O₅), Potassium (K₂O), clay, cation exchange capacity and temperature values in the field. It gives specific fertilization program based on the crop and the soil analysis result. Soil analysis, analysis result and fertilization program takes approximately 10 minutes to extract.
The Digital Soil Analysis Device with 95% accuracy has an accreditation certificate issued by the Food And Agriculture Organization of the United Nations (FAO).
Unlike the soil analysis performed in the laboratory, the drying process is not required for the Digital Soil Analysis Device. Measurement is not recommended in sludge soils.
The device is usable in all regions of Turkey and in all types of soil, without the need for calibration.
It offers unlimited analysis by the license offered with the Digital Soil Analysis Device. The license offers 3-year annual campaign periodically and unlimited annual campaign. It allows to analyze unlimitedly within the period that is purchased.
Soil analysis result is loaded to the application approximately in 2 minutes. It takes 5 minutes to be shared via e-mail.
The Digital Soil Analysis Device sends infrared rays near the ground with the LED lamps located at the bottom and creates a value by calculating the returning lights. The resulting value and evaluated data accumulation results are sent to the mobile application via Bluetooth.
The Digital Soil Analysis Device does not need any installations. There are only 1 button and 2 indicators on the device. One of them refers to the Bluetooth connection and the other refers to the battery level. It turns on when you press the button once. Then, the device name is found in the application and can be downloaded to the smartphone. Later, the devices can be paired and be ready for soil analysis.
First of all, make sure that the mobile application and the device are turned on and that the phone and the device are paired. Then the scanning process is started in the Scan section of the mobile application, following the instructions of the application, the device is ready to scan by slightly pressing on the soil sample. The device can be removed from the sample when the mobile app gives the approval. The lower part of the device should be cleaned with the brush that comes with the device or with a wet cloth. The application will repeat this process 5 times. After that, the scanning process will be completed.
The Soil Analysis Device works by a rechargeable battery.
The device must be continuously charged for at least 12 hours.
On a single charge; approximately 15 soil samples can be anlayzed in the field. Since the charge is used in the on / off processes in the field, more analysis can be done if the samples are gathered in a place such as an office where approximately 25 samples can be analyzed on a single charge.
You can contact us at 0850 433 6477 or email@example.com.
For resetting, the charging tip of the device must be touched on the Reset area, which is the opposite side of the charging chamber.
If needed, you can contact us at 0850 433 6477 or firstname.lastname@example.org.
Mobile application needs internet connection for synchronization. The "Synchronization" must be done before internet connection is cut. After synchronization, analysis can be made in regions where no connection is available. The results of these analyzes can be obtained after the mobile device is reconnected to the internet.
No. The application must be open on only 1 device at a time. If the application is open on two devices at the same time, the analysis is deemed invalid and the analysis report cannot be received.
The ID on the device and the user information defined for the mobile application are unique to each user. Other field managers / agricultural engineers who want to follow the data can access the data by logging in with the unique user information.
The Soil Analysis Device measures soil structure, pH, organic matter, Nitrogen (N), Phosphorus (P₂O₅), Potassium (K₂O), clay, cation exchange capacity and temperature parameters. Although it does not measure micro elements such as Magnesium (Mg), Calcium (Ca), it is aimed to add new parameters such as Calcium (Ca) and Lime with ongoing R&D studies.