It is a soil and weather station that measures the temperature and humidity of the soil as well as the temperature and relative humidity of the air from 2 different points. With the data measured by the device, the irrigation needs of the soil and the plants are determined and the fungal disease risks specific to the plant grown are calculated. Farmers using Agricultural Sensor Station make irrigation and spraying decisions according to the soil and weather conditions in their fields. Detailed information can be accessed here.
The Agricultural Sensor Station is a device that provides hourly data via its mobile application and enables the farmers to make the right decision in their agricultural activities in the light of the data collected.
The device operates between -20 and +85 °C.
The Agricultural Sensor Station collects real data from the field and provides knowledge-based cultivation recommendations. It determines the adequacy of the irrigation applications, fungal disease risks and sends instant messages in need of attention.
Farmers follow the appropriate spraying hours through the application, take timely precautions against fungal diseases, prevent residue problems by using licensed drugs at the correct frequency and dosage, and perform effective spraying. Farmers, who irrigate on time and as required, use their water resources effectively and achieve high yield and good quality.
You can contact us at 0850 433 6477 or firstname.lastname@example.org for details.
No. The Agricultural Sensor Station comes out of its box all set and does not require any installation. The device has an integrated lithium thionyl chloride battery pack which enables 3 years of battery life. Battery consumption may vary depending on field conditions.
Dig a 45-cm-deep pit in the selected area. Take the device out of its box, place the pointy side of the device in the pit and fill the gaps with soil. Make sure there are no puddles or stones near the device and that it makes good contact with the ground. Activate the device by pressing the button for 5 seconds.
The collected data are displayed through the mobile application. Download Turkcell Filiz from Apple Store or Play Store to your mobile phone or tablet and create your profile. Register your field in a couple of steps: click the + button on the main screen, mark your field area and finalize your field registration by entering the crop and variety you have grown, planting-harvest dates, soil type and your 8-digit sensor number.
For the best results and the most accurate recommendations, the device should be placed at the point that represents your field the best and at the effective root depth in the root area of the plant, enabling a simulation of the plants. The device should be located based on some variables such as the root zone of the product, effective root depth and plant spacing. As Doktar's agricultural technical team, we support you with the most effective device installation solutions.
The device, which is 143 cm in length and 15 cm in width, weighs 4 kg and can be transported easily. It is highly recommended to keep the device in its box for safe transportation.
It is recommended to use an average of 1 device per each irrigation plot. Measurement accuracy can be increased by using more than one device in sloping lands, areas with different soil structures and lands where different irrigation applications are performed, and thus maximum benefit is achieved. As Doktar's agricultural technical team, we assist you in determining the number of devices that should be used.
Air Temperature: ±0.5 °C
Relative Humidity: ±%2.0 RH
Soil Temperature: ±2.0 °C
Soil Humidity: ±5.0%
In rare cases, data flow may be interrupted due to the Internet network connection. However, the device keeps the data it collects in its memory for up to 12 hours and sends this data to the cloud with corresponding time stamps when the first suitable connection conditions are met. Please contact us for connection problems longer than 12 hours.
More than one authorized person using the Turkcell Filiz application can access the same data as you. You and your field managers will have the opportunity to monitor the data of your field at the same time.
The device is delivered to the delivery address within a week after the day of purchase. For international deliveries, the lead time may vary depending on the receiving country. You may contact us for further details about international orders.
It establishes a low power consumption internet connection with 2G and Narrow Band Internet of Things (NB-IoT) technologies.